Yamaha UX256 Manuel du propriétaire télécharger pdf (Page 27)

Changing the driver setting (MIDI Patch Screen)

• Changing the connection during playback (PC OUT → MIDI

OUT)

You can change the I/O assignment of the computer’s output port and the UX256’s

output port. The left column shows the computer’s output ports (OUT 1-16), and the

top column shows the UX256’s output ports (1-16). With the default settings, ports

with the same number are connected to each other. However, you can change this

setting by checking the check boxes.

If you check multiple check boxes vertically, MIDI signals from multiple output ports

on the computer are merged and transmitted to one output port on the UX256. If you

check multiple check boxes horizontally, a MIDI signal from one output port on the

computer is distributed to multiple output ports on the UX256.

See page 24 for more information on the relationship between the UX256’s

I/O ports and the port numbers.

• Routing MIDI signals from the computer’s output ports 1, 2, and

3 to MIDI OUT 1 on the UX256

Check the check boxes as shown on the

right, and click [OK] to enable the setting.

NOTE

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Pas de commentaire

Yamaha UX256 Manuel du propriétaire Page 27