Yamaha YSP-500 Manuel du propriétaire télécharger pdf (Page 81)

Remote control features

79 En

ADVANCED

OPERATION

English

In addition to controlling this unit, the remote control can also operate other AV components made by Yamaha and other

manufacturers. To control other components, you must set up the remote control with the appropriate remote control

codes and set the operation mode selector to TV/AV to change the control area.

Depending on the external AV component you are using, you may not be able to operate the component with the remote control, even if

a remote control code is set. In this case, operate the component using the supplied remote control.

You can control other components by setting the

appropriate remote control codes. Codes can be set up for

each input area (STB, VCR, DVD, AUX, and TV).

For a complete list of available remote control codes, refer

to “List of remote control codes” at the end of this manual.

1 Press and hold CODE SET and press one of

the input selector buttons to select the input

source you want to set a remote control code

for.

The transmission indicator flashes twice and remains

lit.

Proceed to step 2 while holding down CODE SET.

2 Press the numeric buttons to enter the

remote control code while holding down

CODE SET.

3 Refer to “Controlling other components” on

page 80 to operate the external component

using the remote control.

If the external component functions correctly the

remote control code setup is successful.

If the external component does not function correctly,

the remote control code may be incorrect. Confirm

that the remote control code is correct. See “List of

remote control codes” at the end of this manual and

start over from step 1.

If the manufacturer of your component has more than one code,

try each of them until you find the correct one.

Remote control features

Note

Setting remote control codes

321

+10

789

STEREO

MY BEAM

SLEEP

INPUTMODE

MUTE

TV INPUT TV MUTE

CODE SET

5BEAM ST+3BEAM 3BEAM

VOL MODE

AUTO

SETUP

MACRO

INPUT2INPUT1

STB

VCR DVD AUX

TVAV

SUR. DECODE

MY SUR.

Transmission indicator

TV MUTE

CODE SET

While holding

down, press

AUX

DVDVCRSTB

Note

If the remote control is without batteries for more than

two minutes, or if exhausted batteries remain in the

remote control, the contents of the memory may be

cleared. When the memory is cleared, insert new

batteries and reset the remote control codes.

When changing the batteries, be careful not to press

any of the buttons on the remote control. Doing so will

clear the contents of the memory.

MY SUR.

Setting example: Yamaha DVD input area

TV MUTE

CODE SET

While holding

down, press

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 107 108

Commentaires sur ces manuels

Pas de commentaire

Yamaha YSP-500 Manuel du propriétaire Page 81

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Yamaha YSP-500