Yamaha G50 Manuel d'utilisateur télécharger pdf (Page 9)

Setting Up

Power Supply

Plug the DC output cable from the AC adaptor into the

DC IN jack on the rear panel, then plug the adaptor into a

convenient wall AC power socket. It is also a good idea

to clip the adaptor’s DC cable into the cable clip on the

G50 rear panel to minimize the possibility of accidentally

unplugging the cable during operation.

■

CAUTION

• Turn your tone generator on before turning on the G50.

This is necessary to ensure that the initial pitch bend, tune,

and other setup parameters transmitted by the G50 at

power-on are received by the tone generator.

• Do not attempt to use an AC adaptor other than the

supplied unit or an appropriate replacement provided by

your Yamaha dealer to power the G50. The use of an

incompatible adaptor may cause irreparable damage to the

G50, and might pose a serious shock hazard!

• Be sure to unplug the AC adaptor from the AC mains socket

when the G50 is not in use.

Tone Generator Connection & MIDI Setup

The G50 can drive just about any external tone

generator or synthesizer, although Yamaha

particularly recommends the MU80 or MU50

XG (GM compatible) tone generators for out-

standing AWM sound, or the VL1-m Version 2 or

VL70-m if you want the extraordinary sound of

Yamaha’s revolutionary Virtual Acoustic Synthe-

sis tone generation system.

Connect the G50 MIDI OUT connector to the

MIDI IN connector of a single external device,

or the first in a “chain” of devices you want to

control. The MIDI THRU connector of the first

device in the chain should then be connected to

the MIDI IN connector of the second device, and

so on. See below for details on setting the G50

MIDI transmit/receive channel(s).

■

NOTES

• Always use high-quality MIDI cables when connect-

ing MIDI devices, and avoid cables longer than

about 15 meters — longer cables can pick up

electrical noise that can cause data errors.

• Keep to turned the power off before the install-

ing.

MIDI

THRU

MIDI

OUT IN

G50

1st MIDI Device 2nd MIDI Device

Setting Up

-IN

DC-IN

PA-3B

AC Power Socket

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Yamaha G50 Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Yamaha G50