Yamaha SLG200 Manuel du propriétaire télécharger pdf (Page 12)

To prevent unnecessary power consumption, the instrument is equipped with an Auto

Power O Function that automatically switches the power o if the instrument has not been

played for more than 30 minutes. If the Auto Power O function switches the instrument’s

power OFF, simply press the power switch again to continue using the instrument.

* The Auto Power OFF function is enabled when shipped from the factory.

Conrming the Auto Power O Function’s Enabled/Disabled Status

• When the Auto Power O Function is enabled, the instrument will directly enter the Play mode (LEDs

do not ash) when switching the power ON (press the power switch or connect a cable to the LINE

OUT jack).

• When the Auto Power O Function is disabled all Tuner LEDs will light then go out one by one

before entering the Play Mode when switching ON the power.

Changing the Auto Power O Function Enabled/Disabled Setting

With the power switched ON (Play Mode), press and hold the TUNER switch for more than two sec-

onds to enable the function.

• Performing the operation described above when the function is enabled will cause all tuner LEDs to

light and then turn o one by one and disable the function.

• Performing the operation described above when the function is disabled will cause the tuner LEDs

to light one by one and enable the function.

About the Auto Power O Function

Play Mode

Lights

Play Mode

Auto Power O

Function disabled

Auto Power O

Function enabled

1 2 ... 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Yamaha SLG200 Manuel du propriétaire Page 12