Yamaha NUAGE FADER Guide de démarrage rapide télécharger pdf (Page 14)

Appendix

14 NUAGE FADER Getting Started

Specifying the Brightness

The way of specifying the brightness is the same as

“Adjusting the Touch Sensitivity” (page 13). When the

window is displayed, specify “Brightness.”

Calibrating Fader Motion or

Position

1. Turn on the device with [ALT] held down.

You can release [ALT] once the menu appears on

the display above the faders.

2. Select “FADER CALIBRATION” using the

[]/[] buttons from the PAGE CONTROL

section and then press [ENTER].

3. Select “MOTOR” to adjust fader motion or

“POSITION” to adjust fader position and

then press [ENTER].

You can select “MOTOR & POSITION” to adjust both

motion and position at the same time.

4. Select “YES” and then press [ENTER].

• If you selected “MOTOR,” do not touch the faders

until calibration is complete.

• If you selected “POSITION,” set all faders to the

level indicated on the display and then press

[ENTER]. This procedure must be repeated

several times.

5. When calibration is complete, the display

will return to the menu. Select “EXIT” and

press [ENTER].

The top menu will be displayed.

6. Select “EXIT” and press [ENTER].

The Nuage Fader will restart.

The adjustments are now completed.

Resetting to the Factory

Default Condition

NOTE

Resetting the device to the factory default condition has no effect

on Nuendo or Nuendo projects that you have created.

The procedure for resetting the device to the factory

default condition (i.e., initialization) is similar to that

described above in “Calibrating Fader Motion and

Position”. In this case, however, you should select

“INITIALIZE MEMORIES” when the menu appears. When

the device has been reset, the display will return to the

menu. Select “EXIT” and press [ENTER].

Option Description

LED Low

Specifies the brightness of the button when

dim.

LED High

Specifies the brightness of the button when

lit.

OLED

Specifies the brightness of organic EL

display in both CHANNEL STRIP section on

Nuage Fader and CONTROL ROOM section

on Nuage Master.

LCD

Specifies the brightness of the [Multi function

display] on Nuage Master.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Yamaha NUAGE FADER Guide de démarrage rapide Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôleurs de DJ Yamaha NUAGE FADER