Yamaha POCKETRAK C24 Spécifications télécharger pdf (Page 19)

3 Recording Settings

POCKETRAK C24 Reference Manual

VAS (Voice Activated System) recording

When the VAS recording function is turned on, if the unit is in recording pause mode, the unit

will automatically start to record as soon as it detects audio at a level above a certain threshold.

The unit will pause recording when the detected audio level falls below the threshold. The VAS

function enables you to start a new recording each time you start playing your musical

instrument during practice sessions. VAS recording is available only when ALC is set to ON.

Note:

Audio at a level below a certain threshold will be undetected and will not be recorded. If

you are planning to record important audio, set the VAS recording to OFF.

1. Press the [MENU/FOLDER] button while the main screen is

displayed, select [REC MENU] → [VAS] → [ON], then press the

[REC] button.

2. Press the [MENU/FOLDER] button twice.

The indicator will appear on the main screen.

3. Press the [REC] button.

As soon as the unit detects audio, recording begins.

If the unit does not detect any audio, the elapsed recording time

indicator, the remaining recording time indicator and the VAS

indicator will flash, and the unit will enter Recording Pause mode.

Note:

· If the recorder does not detect any audio or does not pause recording, adjust the

threshold by following the procedure in the “Setting the voice sensing level (VAS value)”

section below.

· If you start recording while the VAS function is turned on, the first two seconds or so will

be recorded with no exception.

· If the High Pass Filter (HPF) is turned on, the VAS recording function may be

unavailable. Set the High Pass Filter (HPF) to OFF.

Setting the voice sensing level (VAS value)

You can adjust the voice sensing level in five steps (1–5) to accommodate the source

volume level. A larger value will increase the voice activation sensitivity so recording will be

triggered by lower-level audio. If the value is too small, the recorder may not detect audio.

Set the microphone sensitivity (see page 13) in accordance with the source input level so

that the VAS function can work more effectively.

Procedure:

To adjust the voice sensing level, press the [INPUT/SPEED] (+/–)

buttons while recording with the VAS function turned on.

VAS indicator

VAS

VAS value

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 84 85

Pas de commentaire

Yamaha POCKETRAK C24 Spécifications Page 19