Yamaha CDX-E100 Manuel de service télécharger pdf (Page 6)

CDX-E100

Disc Table

Pick-up Head Gear A

Sled Shaft

19.4 ± 0.2mm

Stopper

Check that the disc table height is as specified below.

Fig. 5

Fig. 3

Fig. 4

Stopper

Stopper Pin

Sub Chassis (S)

Chucking Unit

Stopper

Hook

Drive Gear

Drive Unit

5. Removal of Pick-up Head

a. Remove 2 screws ( u ) in Fig. 4.

b. Remove a pick-up cable in Fig. 4.

c. Remove 4 screws ( i

) and then remove the Drive

Unit in Fig. 4.

d. Remove the gear A in Fig. 5.

e. Pull out the Sled Shaft in Fig. 5.

f. Remove the Pick-up Head.

4. Removal of Tray Unit

a. Remove 2 screws ( y ) and then remove the Chuck-

ing Unit in Fig. 3.

b. Remove 1 hook and then remove the Stopper Pin in

Fig. 3.

c. Rotate the Drive Gear and then open the Tray Unit in

Fig. 3.

d. Detach the Stoppers on both sides and then pull out

the Tray in Fig. 3.

Pick-up Cable

1 2 3 4 5 6 7 8 9 10 11 ... 34 35

Pas de commentaire

Yamaha CDX-E100 Manuel de service Page 6