Yamaha v4 Manuel du propriétaire télécharger pdf (Page 12)

Basic Setup

DME Setup Manual 12

6 Checking sound output

In the case of DME24N, DME8i-C, DME4io-C, DME-

8i-ES or DME4io-ES units, appropriate HA control

settings must be made prior to checking the

system’s sound output.

6-1 Right-click the [Analog Input]

component and select [Open HA

Editor] from the drop-down menu.

An “Analog” dialog box that allows head amp

settings will appear.

By default, the gain is set to +10 dBu (i.e.,

the lowest possible gain).

6-2 Adjust the sensitivity to the correct

level for the connected audio

equipment.

n The level displayed by [Gain] is the sensitivity level to be

matched. As the sensitivity of most professional audio

equipment (using XLR connectors) is +4 dBu, the level

shown by [Gain] should be set to “4” in such a case.

When using input from microphones or other similar

sources, turn the dial clockwise to adjust the input volume

to a suitable level. Specifically, it is recommended that

the level shown by the input meter be peaking at around

-18 dB.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

Yamaha v4 Manuel du propriétaire Page 12