Yamaha 02R96 Manuel d'utilisateur télécharger pdf (Page 7)

ENCODER MODE / FADER MODE

The encoders above the faders can be used to edit various channel

parameters. The most useful ones are Pan and Aux send.

1. To edit Pan on the encoders, just press the PAN ENCODER

MODE switch and turn the required encoder. The LCD display will

show the pan position in a ‘pop-up’ window.

2 1

2. To edit Aux on the encoders, press the AUX ENCODER

MODE switch, then select the required AUX# (1-8) with one of the AUX

SELECT switches above. The LCD display will show the Aux level in a

‘pop-up’ window.

3. To see the Aux send information for many channels at the

same time, press the AUX SELECT DISPLAY switch. Each time this

switch is pressed, it will change the LCD to a different page to see the

information for other channels. In these pages Pre/Post status can be

edited, and the Aux sends can be switched off by pressing ENTER

while the cursor is high-lighting the level encoder.

4. When the AUX FADER MODE switch is pressed, the Aux

Send levels are shown on the faders instead of the channel level.

Choose which Aux to see on the faders with the AUX SELECT

switches (as in step 2 above). Press the FADER switch to resume

normal level operation on the faders.

7 02R96-v2 Quick Start Guide

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Pas de commentaire

Yamaha 02R96 Manuel d'utilisateur Page 7