Yamaha C-80 Manuel du propriétaire télécharger pdf

NS-C80

Natural Sound

Center Speaker System

Thank you for selecting this Yamaha NS-C80 speaker system.

This model is designed mainly to be used as a center speaker system.

PRECAUTIONS

Read these precautions carefully before operating

your speaker.

• When using an amplifier with a rated output power

higher than the music input of the speaker, care

should be taken never to exceed the speaker’s

music input.

• Do not attempt to clean the speaker with chemical

solvents as this might damage the finish. To clean,

wipe with a dry, soft cloth.

• To prevent the enclosure from warping or

discoloring, do not place the speaker where it will

be exposed to direct sunlight or excessive humidity.

• Do not place the speaker where it is liable to be

knocked over or struck by falling objects. Stable

placement will also ensure better sound

performance.

• Placing the speaker on the same shelf or rack as

the turntable can result in feedback.

• Anytime you note distortion, reduce the volume

control on your power amplifier/receiver to a lower

setting. Never allow your power amplifier to be

driven into “clipping”.

• Secure placing is the owner’s responsibility.

YAMAHA shall not be liable to any accident

caused by an improper placing of the speaker.

Notes

• The speaker should be placed so that it is

stabilized (with its wide surface down).

Do not place the speaker on either end or with its

narrow surface down.

• Though this speaker is a magnetic shielding

type, there may be an influence on TV picture

according to the type of TV or the placement of

the speaker. In such a case, place the speaker

apart from the TV so that there is no influence on

TV picture.

PLACING THE SPEAKER

NS-C80

TV set

1 2

Résumé du contenu

Page 1 - PLACING THE SPEAKER

NS-C80Natural SoundCenter Speaker SystemThank you for selecting this Yamaha NS-C80 speaker system.This model is designed mainly to be used as a center

Page 2 - SPECIFICATIONS

CONNECTION TOYOUR AMPLIFIERBEFORE MAKING CONNECTIONS, MAKE SURETHAT THE AMPLIFIER IS SWITCHED OFF.m CONNECTIONS• Connect the push-type input terminals